DCP Global
Previous product
Next product
 |
| ||||||||||||||
UsageSethard L is recommended for new and old cementitious surfaces, such as concrete floors and granolithic paving. It should not be used to renovate concrete which is already disintegrating. Typical applications include: Factories Warehouses Garages Refrigeratory Food processing plants Materials Supplied20 litres. StorageStore in dry area away from direct sunlight, at temperatures range between + 5°C and 35 °C. Shelf LifeSethard L has a shelf life of 12 months from date of manufacture if stored in proper conditions and un-opened packs. Coverage Approx. 12 - 14 m²/ liters on freshly poured concrete surfaces. Approx. 9 - 10 m²/ liters on old concrete surfaces. Standard
|
Technical Information
The technical data are specified at 23 ° C. Application InstructionsSURFACE PREPARATION The substrate must be clean, dry, structurally sound, dense and free from oil, grease, dust and other contaminants. A clean surface will ensure maximum penetration of Sethard L into the concrete surface. Surfaces contaminated by oil or grease should be treated with suitable chemical de-greaser then washed with clean water. APPLICATIONAreas deeply contaminated by oils or grease, should be treated by hot compressed air. All contamination and laitance must be removed before Sethard L application to allow for effective penetration. New concrete Sethard L may be applied on newly laid concrete immediately after final trowelling using a low pressure sprayer fitted with a 1.9 ltr/ min (0.5 gpm) sprayer tip. Apply one coat of Sethard L at the rate of 12 - 14 m²/ liters without producing puddles. If surfaces dry immediately, apply more materials as the surfaces should remain wet for 5 - 10 minutes.Allow treated surfaces to dry, then apply curing compound at the specified rate using a suitable product from setseal range. Old concrete Sethard L can be applied to cured concrete of any age. Apply one coat of Sethard L at the rate of 9 - 10 m²/ liters using a low pressure sprayer fitted with 1.9 liters/ minute (0.5 gpm) sprayer tip. Do not apply excess material to avoid material puddling. Use soft bristle broom to evenly spreed Sethard L and ensure uniform wetting. If surfaces dry immediately, apply more materials as the surfaces should remain wet for 5 - 10 minutes. Notes: White residues will form on the surface when excess materials are allowed to puddle which must be removed immediately. NOTES Colored surfaces must be allowed to cure for 28 days prior the application of Sethard L. It is advised to test a small area to evaluate the effect of Sethard L on the color. Concrete surfaces must be dry to maximize penetration. |
Download file
